Updating Engineering Link on the Clients

Please keep the following in mind when installing the Engineering Link:

It is strongly recommended that all features are installed on a local directory.
The CAD integrations are optional. You only need to install the integration you are going to use. In order to use an CAD integration the Engineering Link and Isah client installation are required (please refer to Isah Update Guide).
The Print Manager does not require any other Isah or Engineering Link installations.
See the following Installation Schemes for the correct combinations.

32 bit CAD applications, standard Isah CAD integrations

AutoCAD	IsahEngLink.msi
	IsahEngAutoCAD.msi
Autodesk Inventor	IsahEngLink.msi
	IsahEngInventor.msi
SolidWorks	IsahEngLink.msi
	IsahEngSolidWorks.msi

64 bit CAD applications, standard Isah CAD integrations

AutoCAD	IsahEngLink.msi
	IsahEngAutoCADx.msi
Autodesk Inventor	IsahEngLink.msi
	IsahEngInventorx.msi
SolidWorks	IsahEngLink.msi
	IsahEngSolidWorksx.msi

32 bit customized applications, 32-bit development environment

Customized application

IsahEngLink.msi

64 bit customized applications, 64-bit development environment

Customized application

IsahEngLinkx.msi

Note: All Isah applications are still 32 bit applications. Therefore, always use IsahEngLink.msi (32 bit) for the Engineering Link in combination with Isah applications.