Issue

Issue

Use the Issue form to issue materials for the selected operation.

Standard issue

  1. After you have selected a part on the Issue form, the stock lines of the selected part are displayed.
  2. Select a stock line. The quantity required is filled in automatically, but you can change this value.
  3. Click Issue selected parts.

You can issue parts from multiple stock lines at the same time:

  1. Select a stock line.
  2. Enter a quantity.
  3. Repeat these steps until you have specified all parts to be issued.
  4. Click Issue selected parts.

You can implement the issue only if you have specified a quantity greater than zero for all selected stock lines.

Tip: If you have selected the wrong line, select the line again to undo the selection.

Unplanned issue

Adding a line

If you are using parts that are not in the operation list, click this button to add those parts. A list will now appear containing parts that are in stock. If the part required is not in the list because it is not in stock,

Available orders

click this button to display the entire list of parts.

Find

Use this field to find parts.

Once you have selected a part, continue the standard procedure described above.