New method of displaying phantoms

For copied calculations, both the semi-finished product and the components of the semi-finished product can now be displayed. If the semi-finished product (the phantom) is displayed, you will see that the components are part of the semi-finished product. If the phantom is hidden, you cannot see whether components are part of the semi-finished product or the finished product.

Visibility of phantoms no longer determined by order codes

In previous releases, the visibility of phantoms was determined by order codes. When you selected an order code for a part, you could choose to:

• Show phantoms by using order code 'Insert calculation; do not delete part (phantom)'
• Hide phantoms by using order code 'Insert calculation; do not delete part (phantom)'

From now on, you can set an option to show or hide phantoms (see below), which means that when selecting an order code, you do not have to take into account the calculation structure yet.

The order codes have been changed as follows:

• The order code 'Insert calculation; do not delete part (phantom)' has been renamed to 'Copy calculation (phantom)'
• The order code 'Insert calculation and delete part' has been removed.

Option to set visibility of phantoms

You can now use the Show phantom option to display phantoms in the calculation. The option is available on the following forms:

• Default values
• Parts
• Calculation for parts > Continued and Engineering tabs
• Production calculation for parts > Continued and Engineering tabs

New presets on the 'Calculation for parts' form

A number of presets have been added to the Calculation for parts form:

• The preset 'All lines including phantom' displays all part calculation lines of a part, including all phantom lines, even if you have indicated that phantoms should not be displayed (the Show phantom check box on the form is empty).
• The preset 'Phantom lines' displays all phantom lines, including the phantom lines for which the Show phantom check box is empty.

New preset on the 'Production calculation for parts' form

A new preset has been added to the Production calculation for parts form. The preset 'All lines including phantom' displays all part calculation lines of a production file, including all phantom lines, even if you have indicated that phantoms should not be displayed (the Show phantom check box on the form is empty).