This setting determines the maximum number of operations shown in the Operations form. If the setting's value is 0, no maximum applies.

If a maximum is set, Shop Floor Control will always show at least one operation that is not running. In some cases, this can result in a list that has more than the maximum quantity of operations. For instance, if you have set the maximum to 5 and all five operations are running, SFC will show a sixth line that has not started yet.

If this setting is active, the Operations form will also show WIP operations (Work In Progress; operations that are started by one or more users). If it is not active, WIP operations will not be shown.

This setting determines the operations that will be shown in the Operation overview. The configured range will be checked against the status of the production order of the operation. If the status is not within this range, the operation will not be shown.

This setting determines the operations that will be shown in the Operation overview. The configured range will be checked against the status of the operation. If the status is not within this range, the operation will not be shown.

With this setting, you can rule out operations that are not eligible for work, based on the availability of the materials. You can set a minimum level of availability for all materials. If an operation does not meet this condition, it is not shown in SFC.

With this setting, you can rule out operations that are not eligible for work, based on the state of the previous operations. You can set a minimum state for any previous operation. If an operation does not meet this condition, it is not shown in SFC.

This setting is used when operations are retrieved. The number of days in the future is specified by the value of this setting. If no number is supplied, all operations are retrieved.

This setting contains all departments that are visible in the operation filter for SFC. If left empty, all departments are visible in SFC.

When an operation (man or machine) encounters a malfunction, it is possible to log this malfunction in SFC. For that, you first need to configure possible malfunctions:

1. In Isah, add malfunction groups and underlying malfunctions.
2. In Isah SFC Configuration, set which malfunction groups should be visible in SFC. If you select a group in the Visible malfunctions field, all underlying malfunctions become visible in SFC.

N.B.: If you leave the Visible malfunctions field empty, SFC will show all malfunction codes from Isah in SFC.

Activate this setting if users are allowed to change the operation Memo field in SFC. Any alterations will be saved automatically, but a Save button is available, as well as Undo and Redo buttons.

If this setting is active, SFC users see documents based on the document permissions set in Isah (form 0624). If this setting is not active, SFC shows all documents for an operation or order.

This setting determines whether or not the presence indicator on the Login form is controlled by Shop Floor Control. If the presence is registered by an external system, this setting should be set inactive. Note that, regardless of this setting, the user will always be set to 'Present' when logging in to Shop Floor Control.

This setting determines if users need a PIN code. If it is active, the user needs a four-digit PIN code that needs to be entered every time they log on. The user can change the PIN code in the Shop Floor Control Settings window.

If a timetable or timetables (divided by a semicolon) are set in this field, users will be automatically logged out (and their running operation stopped) at a specific time. The time is set per hour code. You can configure this time in the Isah window for hour codes.

When the user ends a shift, Shop Floor Control checks if the presence registered by the application is in accordance with the schedule for that day. If the setting is active, the application will force the user to add time registrations for absence periods.

This value is used for the Check on presence setting and determines the time margin allowed for presence time. A difference in hours is only considered a mismatch if it is larger than the margin configured here.

When a user ends a working day, Shop Floor Control checks if the working hours registered by the application are in accordance with the time the user was present. This setting determines if the application will force the user to add time registrations if there is a mismatch between presence hours and registered hours:

• No Action: The application does not perform any action when hours do not match
• Signal: The application will notify the user when hours do not match, but does not block ending the working day.
• Block: The application will block ending the working day when hours do not match.

This value is used for the Type of working time check field and determines the time margin allowed for working hours. A difference in hours is only considered a mismatch if it is larger than the margin configured here.

This setting controls the creation of production receipts. You can use it to create and process them automatically when quantities are reported for the last operation in a production order.

You have three options:

• No: Do not create production receipts on reporting quantities for the last operation
• Yes: Create production receipts on reporting quantities for the last operation, but do not process them immediately
• Yes And Process: Create production receipts on reporting quantities for the last operation, and process them immediately.

When produced items are reported, this setting determines if the materials are issued automatically.

This setting has three options:

• No: No automatic issue
• Yes: Automatic issue, but issues are not processed immediately
• Yes And Process: Automatic issue, and issues are processed immediately.

This setting determines if manual issues are processed immediately.

This field sets the initial status code for unplanned, new operations that are created in the SFC application. Operations with this status code will always be shown in the operations overview, regardless of the operation status range defined in the settings.

It is possible to specify a timetable for users without a work schedule for the current day. If this has been done and a user logs in, SFC creates a schedule line. If the default timetable is empty, users without a schedule cannot login to SFC.

Machine operations will be booked on the timetable specified here.

The various operation times can be linked to hour codes. This is needed for the time selection to be available in Shop Floor Control. If no hour code is configured, the selection will be not available.

Default value	Description
SetupTimeOccupationMachineHourCode	Hour code setup time man + machine
SetupTimeOccupationHourCode	Hour code setup time man
SetupTimeMachineHourCode	Hour code setup time machine
CycleTimeOccupationMachineHourCode	Hour code cycle time man + machine
CycleTimeOccupationHourCode	Hour code cycle time man
CycleTimeMachineHourCode	Hour code cycle time machine
SetoffTimeOccupationMachineHourCode	Hour code setoff time man + machine
SetoffTimeOccupationHourCode	Hour code setoff time man
SetoffTimeMachineHourCode	Hour code setoff time machine